Shop

  • Out of stock
    Overview for Centrifugal Pumps. SHURflo close-coupled non-metallic pumps produce high flow rates under moderate head conditions. Designed for continuous medium pressure circulation and transfer of nonflammable liquids, water circulation, booster service, irrigation, spraying systems, jockey pump service, aggressive liquid applications, and other general purpose pumping compatible with pump component materials where no suction lift is required. Water seal flush port is provided for the decontamination of chemicals on the seal and seat elastomers.
    • Capacities to 110 GPM, heads to 95 ft.
    • 1/3 to 3 HP AC (and use 3450 rpm NEMA 56J frame motors with base).
    • Discharge can be rotated in 90-degree intervals.
    • All pumps have 11⁄2″ female NPT inlet and outlet ports.
    • Standard pump models (at 3450 RPM) will handle specific gravities to 1.1 (at 100 SSU or less). For specific gravities to 1.4 (at 100 SSU or less), increase motor HP by one size but not to exceed standard 3 HP motor at 3450 RPM or 65 in.-lbs. of torque maximum. Higher specific gravity fluids are not recommended.
    • Standard pump models (at 3450 RPM) will handle viscosity to 100 SSU (at 1.1 specific gravity or less) and up to 200 SSU (specific gravity of 1.0 or less). For viscosity up to 400 SSU (specific gravity of 1.0 or less), increase motor HP by one size but not to exceed standard 3 HP motor at 3450 RPM or 65 in.-lbs. of torque. For fluids with a viscosity greater than 400 SSU, pump speed must be reduced below 3450 RPM.
    • Single-phase motors are equipped with thermal overload protection. Overload protection not supplied on three-phase units and must be provided in starter units.
    • Shurflo complete Pedestal models are also available. Pedestal mount models feature a 5/8″ diameter, 316 stainless steel solid shaft, a corrosion-resistant coated cast iron bearing housing and a double row of sealed ball bearings. They may be either long coupled or pulley driven with any base-mounted motor such as ODP, TEFC or wash-down motors.
      *THIS PRODUCT SHIPS DIRECTLY FROM THE FACTORY.  PLEASE CONTACT US FOR PRICING AND AVAILABILITY.*
  • Overview for SLV series. The SLV Series diaphragm pump is ideal for low volume, intermittent-duty applications requiring a compact pump with low power consumption. Unique design has no metals in the fluid path for maximum chemical resistance. Pump features include automatic demand operation and elastomers that handle a wide variety of chemicals. Perfect for low volume spraying and transfer. Cost effective yet high performance and reliability, the SLV offers tremendous value.
    • Automatic demand; 25 PSI [1.72 bar] on/40 PSI [2.8 bar]
    • Self-Priming up to 2.5 vertical feet [.76 m]
    • Long life pressure switch
    • Thermally-protected ball bearing motor with splash-proof housing
    • Integral fan radiates heat; External heat sink not required
    • Integral on/off switch optional
  • Overview for 8000 series. The 8000 Series diaphragm pump is Shurflo®’s most widely used industrial and agricultural pump. With spherically shaped valves and automatic demand switch, these pumps deliver consistent, dependable operation and priming; up to 1.8 GPM [6.8 l/min]. They are available in a variety of chemically resistant materials. They can be mounted in any position, and are designed for easy maintenance. They are available in a variety of voltages, from 12 VDC to 230 VAC.
    • Pressures up to 150 PSI [10.3 BAR]
    • Self-Priming up to 8 Vertical Feet [2.4M]
    • Chemically Resistant Materials
    • Designed for Spraying and Fluid Transfer
    • Can Run Dry without Damage
    • Built-In Check Valve
    • Supported for Agriculture
      *THIS PRODUCT SHIPS DIRECTLY FROM THE FACTORY.  PLEASE ALLOW UP TO 14 DAYS FOR DELIVERY.*
  • Overview for 8000 series. The 8000 Series diaphragm pump is Shurflo®’s most widely used industrial and agricultural pump. With spherically shaped valves and automatic demand switch, these pumps deliver consistent, dependable operation and priming; up to 1.8 GPM [6.8 l/min]. They are available in a variety of chemically resistant materials. They can be mounted in any position, and are designed for easy maintenance. They are available in a variety of voltages, from 12 VDC to 230 VAC.
    • Pressures up to 150 PSI [10.3 BAR]
    • Self-Priming up to 8 Vertical Feet [2.4M]
    • Chemically Resistant Materials
    • Designed for Spraying and Fluid Transfer
    • Can Run Dry without Damage
    • Built-In Check Valve
    • Supported for Agriculture
      *THIS PRODUCT SHIPS DIRECTLY FROM THE FACTORY.  PLEASE ALLOW UP TO 14 DAYS FOR DELIVERY.*
  • Overview for 8000 series. The 8000 Series diaphragm pump is Shurflo®’s most widely used industrial and agricultural pump. With spherically shaped valves and automatic demand switch, these pumps deliver consistent, dependable operation and priming; up to 1.8 GPM [6.8 l/min]. They are available in a variety of chemically resistant materials. They can be mounted in any position, and are designed for easy maintenance. They are available in a variety of voltages, from 12 VDC to 230 VAC.
    • Pressures up to 150 PSI [10.3 BAR]
    • Self-Priming up to 8 Vertical Feet [2.4M]
    • Chemically Resistant Materials
    • Designed for Spraying and Fluid Transfer
    • Can Run Dry without Damage
    • Built-In Check Valve
    • Supported for Agriculture
      *THIS PRODUCT SHIPS DIRECTLY FROM THE FACTORY.  PLEASE ALLOW UP TO 14 DAYS FOR DELIVERY.*
  • Overview for 8000 series. The 8000 Series diaphragm pump is Shurflo®’s most widely used industrial and agricultural pump. With spherically shaped valves and automatic demand switch, these pumps deliver consistent, dependable operation and priming; up to 1.8 GPM [6.8 l/min]. They are available in a variety of chemically resistant materials. They can be mounted in any position, and are designed for easy maintenance. They are available in a variety of voltages, from 12 VDC to 230 VAC.
    • Pressures up to 150 PSI [10.3 BAR]
    • Self-Priming up to 8 Vertical Feet [2.4M]
    • Chemically Resistant Materials
    • Designed for Spraying and Fluid Transfer
    • Can Run Dry without Damage
    • Built-In Check Valve
    • Supported for Agriculture
      *THIS PRODUCT SHIPS DIRECTLY FROM THE FACTORY.  PLEASE ALLOW UP TO 14 DAYS FOR DELIVERY.*
  • Overview for 8000 series. The 8000 Series diaphragm pump is Shurflo®’s most widely used industrial and agricultural pump. With spherically shaped valves and automatic demand switch, these pumps deliver consistent, dependable operation and priming; up to 1.8 GPM [6.8 l/min]. They are available in a variety of chemically resistant materials. They can be mounted in any position, and are designed for easy maintenance. They are available in a variety of voltages, from 12 VDC to 230 VAC.
    • Pressures up to 150 PSI [10.3 BAR]
    • Self-Priming up to 8 Vertical Feet [2.4M]
    • Chemically Resistant Materials
    • Designed for Spraying and Fluid Transfer
    • Can Run Dry without Damage
    • Built-In Check Valve
    • Supported for Agriculture
      *THIS PRODUCT SHIPS DIRECTLY FROM THE FACTORY.  PLEASE ALLOW UP TO 14 DAYS FOR DELIVERY.*
  • Overview for 8000 series. The 8000 Series diaphragm pump is Shurflo®’s most widely used industrial and agricultural pump. With spherically shaped valves and automatic demand switch, these pumps deliver consistent, dependable operation and priming; up to 1.8 GPM [6.8 l/min]. They are available in a variety of chemically resistant materials. They can be mounted in any position, and are designed for easy maintenance. They are available in a variety of voltages, from 12 VDC to 230 VAC.
    • Pressures up to 150 PSI [10.3 BAR]
    • Self-Priming up to 8 Vertical Feet [2.4M]
    • Chemically Resistant Materials
    • Designed for Spraying and Fluid Transfer
    • Can Run Dry without Damage
    • Built-In Check Valve
    • Supported for Agriculture
      *THIS PRODUCT SHIPS DIRECTLY FROM THE FACTORY.  PLEASE ALLOW UP TO 14 DAYS FOR DELIVERY.*
  • Overview for 8000 series. The 8000 Series diaphragm pump is Shurflo®’s most widely used industrial and agricultural pump. With spherically shaped valves and automatic demand switch, these pumps deliver consistent, dependable operation and priming; up to 1.8 GPM [6.8 l/min]. They are available in a variety of chemically resistant materials. They can be mounted in any position, and are designed for easy maintenance. They are available in a variety of voltages, from 12 VDC to 230 VAC.
    • Pressures up to 150 PSI [10.3 BAR]
    • Self-Priming up to 8 Vertical Feet [2.4M]
    • Chemically Resistant Materials
    • Designed for Spraying and Fluid Transfer
    • Can Run Dry without Damage
    • Built-In Check Valve
    • Supported for Agriculture
      *THIS PRODUCT SHIPS DIRECTLY FROM THE FACTORY.  PLEASE ALLOW UP TO 14 DAYS FOR DELIVERY.*
  • Overview for 8000 series. The 8000 Series diaphragm pump is Shurflo®’s most widely used industrial and agricultural pump. With spherically shaped valves and automatic demand switch, these pumps deliver consistent, dependable operation and priming; up to 1.8 GPM [6.8 l/min]. They are available in a variety of chemically resistant materials. They can be mounted in any position, and are designed for easy maintenance. They are available in a variety of voltages, from 12 VDC to 230 VAC.
    • Pressures up to 150 PSI [10.3 BAR]
    • Self-Priming up to 8 Vertical Feet [2.4M]
    • Chemically Resistant Materials
    • Designed for Spraying and Fluid Transfer
    • Can Run Dry without Damage
    • Built-In Check Valve
    • Supported for Agriculture
      *THIS PRODUCT SHIPS DIRECTLY FROM THE FACTORY.  PLEASE ALLOW UP TO 14 DAYS FOR DELIVERY.*
  • Overview for 8000 series. The 8000 Series diaphragm pump is Shurflo®’s most widely used industrial and agricultural pump. With spherically shaped valves and automatic demand switch, these pumps deliver consistent, dependable operation and priming; up to 1.8 GPM [6.8 l/min]. They are available in a variety of chemically resistant materials. They can be mounted in any position, and are designed for easy maintenance. They are available in a variety of voltages, from 12 VDC to 230 VAC.
    • Pressures up to 150 PSI [10.3 BAR]
    • Self-Priming up to 8 Vertical Feet [2.4M]
    • Chemically Resistant Materials
    • Designed for Spraying and Fluid Transfer
    • Can Run Dry without Damage
    • Built-In Check Valve
    • Supported for Agriculture
  • Overview for 8000 series. The 8000 Series diaphragm pump is Shurflo®’s most widely used industrial and agricultural pump. With spherically shaped valves and automatic demand switch, these pumps deliver consistent, dependable operation and priming; up to 1.8 GPM [6.8 l/min]. They are available in a variety of chemically resistant materials. They can be mounted in any position, and are designed for easy maintenance. They are available in a variety of voltages, from 12 VDC to 230 VAC.
    • Pressures up to 150 PSI [10.3 BAR]
    • Self-Priming up to 8 Vertical Feet [2.4M]
    • Chemically Resistant Materials
    • Designed for Spraying and Fluid Transfer
    • Can Run Dry without Damage
    • Built-In Check Valve
    • Supported for Agriculture
      *THIS PRODUCT SHIPS DIRECTLY FROM THE FACTORY.  PLEASE ALLOW UP TO 14 DAYS FOR DELIVERY.*

Title

Go to Top