Centrifugal Pump

  • Out of stock
    Overview for Centrifugal Pumps. SHURflo close-coupled non-metallic pumps produce high flow rates under moderate head conditions. Designed for continuous medium pressure circulation and transfer of nonflammable liquids, water circulation, booster service, irrigation, spraying systems, jockey pump service, aggressive liquid applications, and other general purpose pumping compatible with pump component materials where no suction lift is required. Water seal flush port is provided for the decontamination of chemicals on the seal and seat elastomers.
    • Capacities to 110 GPM, heads to 95 ft.
    • 1/3 to 3 HP AC (and use 3450 rpm NEMA 56J frame motors with base).
    • Discharge can be rotated in 90-degree intervals.
    • All pumps have 11⁄2″ female NPT inlet and outlet ports.
    • Standard pump models (at 3450 RPM) will handle specific gravities to 1.1 (at 100 SSU or less). For specific gravities to 1.4 (at 100 SSU or less), increase motor HP by one size but not to exceed standard 3 HP motor at 3450 RPM or 65 in.-lbs. of torque maximum. Higher specific gravity fluids are not recommended.
    • Standard pump models (at 3450 RPM) will handle viscosity to 100 SSU (at 1.1 specific gravity or less) and up to 200 SSU (specific gravity of 1.0 or less). For viscosity up to 400 SSU (specific gravity of 1.0 or less), increase motor HP by one size but not to exceed standard 3 HP motor at 3450 RPM or 65 in.-lbs. of torque. For fluids with a viscosity greater than 400 SSU, pump speed must be reduced below 3450 RPM.
    • Single-phase motors are equipped with thermal overload protection. Overload protection not supplied on three-phase units and must be provided in starter units.
    • Shurflo complete Pedestal models are also available. Pedestal mount models feature a 5/8″ diameter, 316 stainless steel solid shaft, a corrosion-resistant coated cast iron bearing housing and a double row of sealed ball bearings. They may be either long coupled or pulley driven with any base-mounted motor such as ODP, TEFC or wash-down motors.
      *THIS PRODUCT SHIPS DIRECTLY FROM THE FACTORY.  PLEASE CONTACT US FOR PRICING AND AVAILABILITY.*
  • Out of stock
    Overview for Centrifugal Pumps. SHURflo close-coupled non-metallic pumps produce high flow rates under moderate head conditions. Designed for continuous medium pressure circulation and transfer of nonflammable liquids, water circulation, booster service, irrigation, spraying systems, jockey pump service, aggressive liquid applications, and other general purpose pumping compatible with pump component materials where no suction lift is required. Water seal flush port is provided for the decontamination of chemicals on the seal and seat elastomers.
    • Capacities to 110 GPM, heads to 95 ft.
    • 1/3 to 3 HP AC (and use 3450 rpm NEMA 56J frame motors with base).
    • Discharge can be rotated in 90-degree intervals.
    • All pumps have 11⁄2″ female NPT inlet and outlet ports.
    • Standard pump models (at 3450 RPM) will handle specific gravities to 1.1 (at 100 SSU or less). For specific gravities to 1.4 (at 100 SSU or less), increase motor HP by one size but not to exceed standard 3 HP motor at 3450 RPM or 65 in.-lbs. of torque maximum. Higher specific gravity fluids are not recommended.
    • Standard pump models (at 3450 RPM) will handle viscosity to 100 SSU (at 1.1 specific gravity or less) and up to 200 SSU (specific gravity of 1.0 or less). For viscosity up to 400 SSU (specific gravity of 1.0 or less), increase motor HP by one size but not to exceed standard 3 HP motor at 3450 RPM or 65 in.-lbs. of torque. For fluids with a viscosity greater than 400 SSU, pump speed must be reduced below 3450 RPM.
    • Single-phase motors are equipped with thermal overload protection. Overload protection not supplied on three-phase units and must be provided in starter units.
    • Shurflo complete Pedestal models are also available. Pedestal mount models feature a 5/8″ diameter, 316 stainless steel solid shaft, a corrosion-resistant coated cast iron bearing housing and a double row of sealed ball bearings. They may be either long coupled or pulley driven with any base-mounted motor such as ODP, TEFC or wash-down motors.
      *THIS PRODUCT SHIPS DIRECTLY FROM THE FACTORY.  PLEASE CONTACT US FOR PRICING AND AVAILABILITY.*
  • Out of stock
    Overview for Centrifugal Pumps. SHURflo close-coupled non-metallic pumps produce high flow rates under moderate head conditions. Designed for continuous medium pressure circulation and transfer of nonflammable liquids, water circulation, booster service, irrigation, spraying systems, jockey pump service, aggressive liquid applications, and other general purpose pumping compatible with pump component materials where no suction lift is required. Water seal flush port is provided for the decontamination of chemicals on the seal and seat elastomers.
    • Capacities to 110 GPM, heads to 95 ft.
    • 1/3 to 3 HP AC (and use 3450 rpm NEMA 56J frame motors with base).
    • Discharge can be rotated in 90-degree intervals.
    • All pumps have 11⁄2″ female NPT inlet and outlet ports.
    • Standard pump models (at 3450 RPM) will handle specific gravities to 1.1 (at 100 SSU or less). For specific gravities to 1.4 (at 100 SSU or less), increase motor HP by one size but not to exceed standard 3 HP motor at 3450 RPM or 65 in.-lbs. of torque maximum. Higher specific gravity fluids are not recommended.
    • Standard pump models (at 3450 RPM) will handle viscosity to 100 SSU (at 1.1 specific gravity or less) and up to 200 SSU (specific gravity of 1.0 or less). For viscosity up to 400 SSU (specific gravity of 1.0 or less), increase motor HP by one size but not to exceed standard 3 HP motor at 3450 RPM or 65 in.-lbs. of torque. For fluids with a viscosity greater than 400 SSU, pump speed must be reduced below 3450 RPM.
    • Single-phase motors are equipped with thermal overload protection. Overload protection not supplied on three-phase units and must be provided in starter units.
    • Shurflo complete Pedestal models are also available. Pedestal mount models feature a 5/8″ diameter, 316 stainless steel solid shaft, a corrosion-resistant coated cast iron bearing housing and a double row of sealed ball bearings. They may be either long coupled or pulley driven with any base-mounted motor such as ODP, TEFC or wash-down motors.
      *THIS PRODUCT SHIPS DIRECTLY FROM THE FACTORY.  PLEASE CONTACT US FOR PRICING AND AVAILABILITY.*
  • Out of stock
    Overview for Centrifugal Pumps. SHURflo close-coupled non-metallic pumps produce high flow rates under moderate head conditions. Designed for continuous medium pressure circulation and transfer of nonflammable liquids, water circulation, booster service, irrigation, spraying systems, jockey pump service, aggressive liquid applications, and other general purpose pumping compatible with pump component materials where no suction lift is required. Water seal flush port is provided for the decontamination of chemicals on the seal and seat elastomers.
    • Capacities to 110 GPM, heads to 95 ft.
    • 1/3 to 3 HP AC (and use 3450 rpm NEMA 56J frame motors with base).
    • Discharge can be rotated in 90-degree intervals.
    • All pumps have 11⁄2″ female NPT inlet and outlet ports.
    • Standard pump models (at 3450 RPM) will handle specific gravities to 1.1 (at 100 SSU or less). For specific gravities to 1.4 (at 100 SSU or less), increase motor HP by one size but not to exceed standard 3 HP motor at 3450 RPM or 65 in.-lbs. of torque maximum. Higher specific gravity fluids are not recommended.
    • Standard pump models (at 3450 RPM) will handle viscosity to 100 SSU (at 1.1 specific gravity or less) and up to 200 SSU (specific gravity of 1.0 or less). For viscosity up to 400 SSU (specific gravity of 1.0 or less), increase motor HP by one size but not to exceed standard 3 HP motor at 3450 RPM or 65 in.-lbs. of torque. For fluids with a viscosity greater than 400 SSU, pump speed must be reduced below 3450 RPM.
    • Single-phase motors are equipped with thermal overload protection. Overload protection not supplied on three-phase units and must be provided in starter units.
    • Shurflo complete Pedestal models are also available. Pedestal mount models feature a 5/8″ diameter, 316 stainless steel solid shaft, a corrosion-resistant coated cast iron bearing housing and a double row of sealed ball bearings. They may be either long coupled or pulley driven with any base-mounted motor such as ODP, TEFC or wash-down motors.
      *THIS PRODUCT SHIPS DIRECTLY FROM THE FACTORY.  PLEASE CONTACT US FOR PRICING AND AVAILABILITY.*
  • Overview for Magnetic Drive Pumps. A sealless magnet drive pump uses magnet torque to transmit energy from the motor to the impeller. A magnet coupling is formed using an inner, or driven magnet, attached to the impeller and an outer, or drive magnet, attached to the motor shaft. This design eliminates mechanical shaft seals or packing, since there is no direct connection between the motor shaft and the impeller. The front and rear casings, sealed with a static o-ring, form the pump or liquid end. The magnetic field is transmitted from the drive magnet through the rear casing to the driven magnet that is attached to the impeller. The combined coupling torque of the drive magnet and impeller magnet provides the driving power to the fluid being pumped
    • Twin bearing system handles thrust loads, extends service life
    • Hollow rotating spindle/internal cooling circuit reduces bearing temperature
    • Compact design
    • Quiet energy efficient design
    • Other sizes, voltages and material available
    • Few moving parts for easy maintenance
      *THIS PRODUCT SHIPS DIRECTLY FROM THE FACTORY.  PLEASE CONTACT US FOR SPECIAL PRICING AND AVAILABILITY.*
  • Overview for Magnetic Drive Pumps. A sealless magnet drive pump uses magnet torque to transmit energy from the motor to the impeller. A magnet coupling is formed using an inner, or driven magnet, attached to the impeller and an outer, or drive magnet, attached to the motor shaft. This design eliminates mechanical shaft seals or packing, since there is no direct connection between the motor shaft and the impeller. The front and rear casings, sealed with a static o-ring, form the pump or liquid end. The magnetic field is transmitted from the drive magnet through the rear casing to the driven magnet that is attached to the impeller. The combined coupling torque of the drive magnet and impeller magnet provides the driving power to the fluid being pumped
    • Twin bearing system handles thrust loads, extends service life
    • Hollow rotating spindle/internal cooling circuit reduces bearing temperature
    • Compact design
    • Quiet energy efficient design
    • Other sizes, voltages and material available
    • Few moving parts for easy maintenance
      *THIS PRODUCT SHIPS DIRECTLY FROM THE FACTORY.  PLEASE CONTACT US FOR SPECIAL PRICING AND AVAILABILITY.*
  • Overview for Magnetic Drive Pumps. A sealless magnet drive pump uses magnet torque to transmit energy from the motor to the impeller. A magnet coupling is formed using an inner, or driven magnet, attached to the impeller and an outer, or drive magnet, attached to the motor shaft. This design eliminates mechanical shaft seals or packing, since there is no direct connection between the motor shaft and the impeller. The front and rear casings, sealed with a static o-ring, form the pump or liquid end. The magnetic field is transmitted from the drive magnet through the rear casing to the driven magnet that is attached to the impeller. The combined coupling torque of the drive magnet and impeller magnet provides the driving power to the fluid being pumped
    • Twin bearing system handles thrust loads, extends service life
    • Hollow rotating spindle/internal cooling circuit reduces bearing temperature
    • Compact design
    • Quiet energy efficient design
    • Other sizes, voltages and material available
    • Few moving parts for easy maintenance
      *THIS PRODUCT SHIPS DIRECTLY FROM THE FACTORY.  PLEASE CONTACT US FOR SPECIAL PRICING AND AVAILABILITY.*
  • Overview for Magnetic Drive Pumps. A sealless magnet drive pump uses magnet torque to transmit energy from the motor to the impeller. A magnet coupling is formed using an inner, or driven magnet, attached to the impeller and an outer, or drive magnet, attached to the motor shaft. This design eliminates mechanical shaft seals or packing, since there is no direct connection between the motor shaft and the impeller. The front and rear casings, sealed with a static o-ring, form the pump or liquid end. The magnetic field is transmitted from the drive magnet through the rear casing to the driven magnet that is attached to the impeller. The combined coupling torque of the drive magnet and impeller magnet provides the driving power to the fluid being pumped
    • Twin bearing system handles thrust loads, extends service life
    • Hollow rotating spindle/internal cooling circuit reduces bearing temperature
    • Compact design
    • Quiet energy efficient design
    • Other sizes, voltages and material available
    • Few moving parts for easy maintenance
      *THIS PRODUCT SHIPS DIRECTLY FROM THE FACTORY.  PLEASE CONTACT US FOR SPECIAL PRICING AND AVAILABILITY.*
  • Overview for Magnetic Drive Pumps. A sealless magnet drive pump uses magnet torque to transmit energy from the motor to the impeller. A magnet coupling is formed using an inner, or driven magnet, attached to the impeller and an outer, or drive magnet, attached to the motor shaft. This design eliminates mechanical shaft seals or packing, since there is no direct connection between the motor shaft and the impeller. The front and rear casings, sealed with a static o-ring, form the pump or liquid end. The magnetic field is transmitted from the drive magnet through the rear casing to the driven magnet that is attached to the impeller. The combined coupling torque of the drive magnet and impeller magnet provides the driving power to the fluid being pumped
    • Twin bearing system handles thrust loads, extends service life
    • Hollow rotating spindle/internal cooling circuit reduces bearing temperature
    • Compact design
    • Quiet energy efficient design
    • Other sizes, voltages and material available
    • Few moving parts for easy maintenance
      *THIS PRODUCT SHIPS DIRECTLY FROM THE FACTORY.  PLEASE CONTACT US FOR SPECIAL PRICING AND AVAILABILITY.*
  • Overview for Magnetic Drive Pumps. A sealless magnet drive pump uses magnet torque to transmit energy from the motor to the impeller. A magnet coupling is formed using an inner, or driven magnet, attached to the impeller and an outer, or drive magnet, attached to the motor shaft. This design eliminates mechanical shaft seals or packing, since there is no direct connection between the motor shaft and the impeller. The front and rear casings, sealed with a static o-ring, form the pump or liquid end. The magnetic field is transmitted from the drive magnet through the rear casing to the driven magnet that is attached to the impeller. The combined coupling torque of the drive magnet and impeller magnet provides the driving power to the fluid being pumped
    • Twin bearing system handles thrust loads, extends service life
    • Hollow rotating spindle/internal cooling circuit reduces bearing temperature
    • Compact design
    • Quiet energy efficient design
    • Other sizes, voltages and material available
    • Few moving parts for easy maintenance
      *THIS PRODUCT SHIPS DIRECTLY FROM THE FACTORY.  PLEASE CONTACT US FOR SPECIAL PRICING AND AVAILABILITY.*
  • Overview for Magnetic Drive Pumps. A sealless magnet drive pump uses magnet torque to transmit energy from the motor to the impeller. A magnet coupling is formed using an inner, or driven magnet, attached to the impeller and an outer, or drive magnet, attached to the motor shaft. This design eliminates mechanical shaft seals or packing, since there is no direct connection between the motor shaft and the impeller. The front and rear casings, sealed with a static o-ring, form the pump or liquid end. The magnetic field is transmitted from the drive magnet through the rear casing to the driven magnet that is attached to the impeller. The combined coupling torque of the drive magnet and impeller magnet provides the driving power to the fluid being pumped
    • Twin bearing system handles thrust loads, extends service life
    • Hollow rotating spindle/internal cooling circuit reduces bearing temperature
    • Compact design
    • Quiet energy efficient design
    • Other sizes, voltages and material available
    • Few moving parts for easy maintenance
      *THIS PRODUCT SHIPS DIRECTLY FROM THE FACTORY.  PLEASE CONTACT US FOR SPECIAL PRICING AND AVAILABILITY.*
  • Overview for Magnetic Drive Pumps. A sealless magnet drive pump uses magnet torque to transmit energy from the motor to the impeller. A magnet coupling is formed using an inner, or driven magnet, attached to the impeller and an outer, or drive magnet, attached to the motor shaft. This design eliminates mechanical shaft seals or packing, since there is no direct connection between the motor shaft and the impeller. The front and rear casings, sealed with a static o-ring, form the pump or liquid end. The magnetic field is transmitted from the drive magnet through the rear casing to the driven magnet that is attached to the impeller. The combined coupling torque of the drive magnet and impeller magnet provides the driving power to the fluid being pumped
    • Twin bearing system handles thrust loads, extends service life
    • Hollow rotating spindle/internal cooling circuit reduces bearing temperature
    • Compact design
    • Quiet energy efficient design
    • Other sizes, voltages and material available
    • Few moving parts for easy maintenance
      *THIS PRODUCT SHIPS DIRECTLY FROM THE FACTORY.  PLEASE CONTACT US FOR SPECIAL PRICING AND AVAILABILITY.*

Title

Go to Top