Water

  • Out of stock
    Overview for gear pump. SHURflo self-priming, positive displacement, external rotary gear pumps are ideal for a wide range of light-duty industrial, marine, agricultural, and commercial applications, providing a nearly pulseless flow and are designed specifically for reduced speed operations. Some models include an internal pressure relief valve. Limited self-priming capability on packing seal types. Pillow block shaft assembly is required when pulley driven. Motors are not included. Uses: For use with non-particulate and non-abrasive fluids compatible with pump wet-end construction component materials.
    • Flows to 24.8 GPM
    • Max. RPM: 1725
    • Max. PSI: 100
    • Suction lift to 19.5 ft.
    • Maximum viscosity of 100,000 SSU at reduced speed (max. input torque of 45 -160 in.-lbs.)
    • Temperature ranges from -20 to 280° F
    • Seals – Viton lip or Kevlar®/Teflon® packing type
    • Bushings – Steel, bronze or carbon/graphite
    • Maximum working pressure: 130 PSI
    • Pumps can operate bi-directionally (reversible). In the opposite rotation, the pump pressure relief valve, if equipped, will not function.
      *THIS PRODUCT SHIPS DIRECTLY FROM THE FACTORY.  PLEASE CONTACT US FOR PRICING AND AVAILABILITY.*
  • Out of stock
    Overview for Centrifugal Pumps. SHURflo close-coupled non-metallic pumps produce high flow rates under moderate head conditions. Designed for continuous medium pressure circulation and transfer of nonflammable liquids, water circulation, booster service, irrigation, spraying systems, jockey pump service, aggressive liquid applications, and other general purpose pumping compatible with pump component materials where no suction lift is required. Water seal flush port is provided for the decontamination of chemicals on the seal and seat elastomers.
    • Capacities to 110 GPM, heads to 95 ft.
    • 1/3 to 3 HP AC (and use 3450 rpm NEMA 56J frame motors with base).
    • Discharge can be rotated in 90-degree intervals.
    • All pumps have 11⁄2″ female NPT inlet and outlet ports.
    • Standard pump models (at 3450 RPM) will handle specific gravities to 1.1 (at 100 SSU or less). For specific gravities to 1.4 (at 100 SSU or less), increase motor HP by one size but not to exceed standard 3 HP motor at 3450 RPM or 65 in.-lbs. of torque maximum. Higher specific gravity fluids are not recommended.
    • Standard pump models (at 3450 RPM) will handle viscosity to 100 SSU (at 1.1 specific gravity or less) and up to 200 SSU (specific gravity of 1.0 or less). For viscosity up to 400 SSU (specific gravity of 1.0 or less), increase motor HP by one size but not to exceed standard 3 HP motor at 3450 RPM or 65 in.-lbs. of torque. For fluids with a viscosity greater than 400 SSU, pump speed must be reduced below 3450 RPM.
    • Single-phase motors are equipped with thermal overload protection. Overload protection not supplied on three-phase units and must be provided in starter units.
    • Shurflo complete Pedestal models are also available. Pedestal mount models feature a 5/8″ diameter, 316 stainless steel solid shaft, a corrosion-resistant coated cast iron bearing housing and a double row of sealed ball bearings. They may be either long coupled or pulley driven with any base-mounted motor such as ODP, TEFC or wash-down motors.
      *THIS PRODUCT SHIPS DIRECTLY FROM THE FACTORY.  PLEASE CONTACT US FOR PRICING AND AVAILABILITY.*
  • Overview of 2088 series. Shurflo® 2088 Series diaphragm pumps deliver reliable performance in high flow, moderate pressure applications. They are used in a variety of spraying and transfer applications that require flows of up to 4.0 GPM [14.4 l/min]. They can be mounted in any position, and are designed for easy maintenance.
    • Self-Priming up to 12 Vertical Feet [3.7M]
    • Chemically Resistant Materials
    • Automatic Demand
    • Built-In Check Valve (May Vary by Model) to Prevent Back Flow of Fluid
    • Supported for Agriculture
  • Overview of 2088 series. Shurflo® 2088 Series diaphragm pumps deliver reliable performance in high flow, moderate pressure applications. They are used in a variety of spraying and transfer applications that require flows of up to 4.0 GPM [14.4 l/min]. They can be mounted in any position, and are designed for easy maintenance.
    • Self-Priming up to 12 Vertical Feet [3.7M]
    • Chemically Resistant Materials
    • Automatic Demand
    • Built-In Check Valve (May Vary by Model) to Prevent Back Flow of Fluid
    • Supported for Agriculture
  • Overview for 8000 series. The 8000 Series diaphragm pump is Shurflo®’s most widely used industrial and agricultural pump. With spherically shaped valves and automatic demand switch, these pumps deliver consistent, dependable operation and priming; up to 1.8 GPM [6.8 l/min]. They are available in a variety of chemically resistant materials. They can be mounted in any position, and are designed for easy maintenance. They are available in a variety of voltages, from 12 VDC to 230 VAC.
    • Pressures up to 150 PSI [10.3 BAR]
    • Self-Priming up to 8 Vertical Feet [2.4M]
    • Chemically Resistant Materials
    • Designed for Spraying and Fluid Transfer
    • Can Run Dry without Damage
    • Built-In Check Valve
    • Supported for Agriculture
  • Overview for 8000 series. The 8000 Series diaphragm pump is Shurflo®’s most widely used industrial and agricultural pump. With spherically shaped valves and automatic demand switch, these pumps deliver consistent, dependable operation and priming; up to 1.8 GPM [6.8 l/min]. They are available in a variety of chemically resistant materials. They can be mounted in any position, and are designed for easy maintenance. They are available in a variety of voltages, from 12 VDC to 230 VAC.
    • Pressures up to 150 PSI [10.3 BAR]
    • Self-Priming up to 8 Vertical Feet [2.4M]
    • Chemically Resistant Materials
    • Designed for Spraying and Fluid Transfer
    • Can Run Dry without Damage
    • Built-In Check Valve
    • Supported for Agriculture
  • Overview for 8000 series. The 8000 Series diaphragm pump is Shurflo®’s most widely used industrial and agricultural pump. With spherically shaped valves and automatic demand switch, these pumps deliver consistent, dependable operation and priming; up to 1.8 GPM [6.8 l/min]. They are available in a variety of chemically resistant materials. They can be mounted in any position, and are designed for easy maintenance. They are available in a variety of voltages, from 12 VDC to 230 VAC.
    • Pressures up to 150 PSI [10.3 BAR]
    • Self-Priming up to 8 Vertical Feet [2.4M]
    • Chemically Resistant Materials
    • Designed for Spraying and Fluid Transfer
    • Can Run Dry without Damage
    • Built-In Check Valve
    • Supported for Agriculture
  • Overview for 8000 series. The 8000 Series diaphragm pump is Shurflo®’s most widely used industrial and agricultural pump. With spherically shaped valves and automatic demand switch, these pumps deliver consistent, dependable operation and priming; up to 1.8 GPM [6.8 l/min]. They are available in a variety of chemically resistant materials. They can be mounted in any position, and are designed for easy maintenance. They are available in a variety of voltages, from 12 VDC to 230 VAC.
    • Pressures up to 150 PSI [10.3 BAR]
    • Self-Priming up to 8 Vertical Feet [2.4M]
    • Chemically Resistant Materials
    • Designed for Spraying and Fluid Transfer
    • Can Run Dry without Damage
    • Built-In Check Valve
    • Supported for Agriculture
  • Overview for 8000 series. The 8000 Series diaphragm pump is Shurflo®’s most widely used industrial and agricultural pump. With spherically shaped valves and automatic demand switch, these pumps deliver consistent, dependable operation and priming; up to 1.8 GPM [6.8 l/min]. They are available in a variety of chemically resistant materials. They can be mounted in any position, and are designed for easy maintenance. They are available in a variety of voltages, from 12 VDC to 230 VAC.
    • Pressures up to 150 PSI [10.3 BAR]
    • Self-Priming up to 8 Vertical Feet [2.4M]
    • Chemically Resistant Materials
    • Designed for Spraying and Fluid Transfer
    • Can Run Dry without Damage
    • Built-In Check Valve
    • Supported for Agriculture
  • Overview for 8000 series. The 8000 Series diaphragm pump is Shurflo®’s most widely used industrial and agricultural pump. With spherically shaped valves and automatic demand switch, these pumps deliver consistent, dependable operation and priming; up to 1.8 GPM [6.8 l/min]. They are available in a variety of chemically resistant materials. They can be mounted in any position, and are designed for easy maintenance. They are available in a variety of voltages, from 12 VDC to 230 VAC.
    • Pressures up to 150 PSI [10.3 BAR]
    • Self-Priming up to 8 Vertical Feet [2.4M]
    • Chemically Resistant Materials
    • Designed for Spraying and Fluid Transfer
    • Can Run Dry without Damage
    • Built-In Check Valve
    • Supported for Agriculture
      *THIS PRODUCT SHIPS DIRECTLY FROM THE FACTORY.  PLEASE ALLOW UP TO 14 DAYS FOR DELIVERY.*
  • Overview for 8000 series. The 8000 Series diaphragm pump is Shurflo®’s most widely used industrial and agricultural pump. With spherically shaped valves and automatic demand switch, these pumps deliver consistent, dependable operation and priming; up to 1.8 GPM [6.8 l/min]. They are available in a variety of chemically resistant materials. They can be mounted in any position, and are designed for easy maintenance. They are available in a variety of voltages, from 12 VDC to 230 VAC.
    • Pressures up to 150 PSI [10.3 BAR]
    • Self-Priming up to 8 Vertical Feet [2.4M]
    • Chemically Resistant Materials
    • Designed for Spraying and Fluid Transfer
    • Can Run Dry without Damage
    • Built-In Check Valve
    • Supported for Agriculture
      *THIS PRODUCT SHIPS DIRECTLY FROM THE FACTORY.  PLEASE ALLOW UP TO 14 DAYS FOR DELIVERY.*
  • Overview for 8000 series. The 8000 Series diaphragm pump is Shurflo®’s most widely used industrial and agricultural pump. With spherically shaped valves and automatic demand switch, these pumps deliver consistent, dependable operation and priming; up to 1.8 GPM [6.8 l/min]. They are available in a variety of chemically resistant materials. They can be mounted in any position, and are designed for easy maintenance. They are available in a variety of voltages, from 12 VDC to 230 VAC.
    • Pressures up to 150 PSI [10.3 BAR]
    • Self-Priming up to 8 Vertical Feet [2.4M]
    • Chemically Resistant Materials
    • Designed for Spraying and Fluid Transfer
    • Can Run Dry without Damage
    • Built-In Check Valve
    • Supported for Agriculture
      *THIS PRODUCT SHIPS DIRECTLY FROM THE FACTORY.  PLEASE ALLOW UP TO 14 DAYS FOR DELIVERY.*

Title

Go to Top