Shurflo Industrial CHMCV573T Close-Coupled Centrifugal Pump Cast Iron

Overview for Centrifugal Pumps.

SHURflo close-coupled non-metallic pumps produce high flow rates under moderate head conditions. Designed for continuous medium pressure circulation and transfer of nonflammable liquids, water circulation, booster service, irrigation, spraying systems, jockey pump service, aggressive liquid applications, and other general purpose pumping compatible with pump component materials where no suction lift is required. Water seal flush port is provided for the decontamination of chemicals on the seal and seat elastomers.

• Capacities to 110 GPM, heads to 95 ft.
• 1/3 to 3 HP AC (and use 3450 rpm NEMA 56J frame motors with base).
• Discharge can be rotated in 90-degree intervals.
• All pumps have 11⁄2″ female NPT inlet and outlet ports.
• Standard pump models (at 3450 RPM) will handle specific gravities to 1.1 (at 100 SSU or less). For specific gravities to 1.4 (at 100 SSU or less), increase motor HP by one size but not to exceed standard 3 HP motor at 3450 RPM or 65 in.-lbs. of torque maximum. Higher specific gravity fluids are not recommended.
• Standard pump models (at 3450 RPM) will handle viscosity to 100 SSU (at 1.1 specific gravity or less) and up to 200 SSU (specific gravity of 1.0 or less). For viscosity up to 400 SSU (specific gravity of 1.0 or less), increase motor HP by one size but not to exceed standard 3 HP motor at 3450 RPM or 65 in.-lbs. of torque. For fluids with a viscosity greater than 400 SSU, pump speed must be reduced below 3450 RPM.
• Single-phase motors are equipped with thermal overload protection. Overload protection not supplied on three-phase units and must be provided in starter units.
• Shurflo complete Pedestal models are also available. Pedestal mount models feature a 5/8″ diameter, 316 stainless steel solid shaft, a corrosion-resistant coated cast iron bearing housing and a double row of sealed ball bearings. They may be either long coupled or pulley driven with any base-mounted motor such as ODP, TEFC or wash-down motors.